qat.purr.backends.qblox package

Submodules

• qat.purr.backends.qblox.codegen module
  • QbloxContext
    • QbloxContext.clear()
    • QbloxContext.create_package()
    • QbloxContext.delay()
    • QbloxContext.duration
    • QbloxContext.id()
    • QbloxContext.is_empty()
    • QbloxContext.measure_acquire()
    • QbloxContext.reset_phase()
    • QbloxContext.shift_frequency()
    • QbloxContext.shift_phase()
    • QbloxContext.synchronize()
    • QbloxContext.waveform()
  • QbloxEmitter
    • QbloxEmitter.emit()
    • QbloxEmitter.optimize()
  • QbloxPackage
    • QbloxPackage.sequence
    • QbloxPackage.sequencer_config
    • QbloxPackage.target
  • calculate_duration()
  • get_nco_phase_arguments()
  • get_nco_set_frequency_arguments()
• qat.purr.backends.qblox.config module
  • AttConfig
    • AttConfig.in0
    • AttConfig.out0
    • AttConfig.out1
  • AwgConfig
    • AwgConfig.cont_mode_en_path0
    • AwgConfig.cont_mode_en_path1
    • AwgConfig.cont_mode_waveform_idx_path0
    • AwgConfig.cont_mode_waveform_idx_path1
    • AwgConfig.gain_path0
    • AwgConfig.gain_path1
    • AwgConfig.mod_en
    • AwgConfig.offset_path0
    • AwgConfig.offset_path1
    • AwgConfig.upsample_rate_path0
    • AwgConfig.upsample_rate_path1
  • ConnectionConfig
    • ConnectionConfig.acq
    • ConnectionConfig.acq_I
    • ConnectionConfig.acq_Q
    • ConnectionConfig.bulk_value
    • ConnectionConfig.out0
    • ConnectionConfig.out1
    • ConnectionConfig.out2
    • ConnectionConfig.out3
  • GainConfig
    • GainConfig.in0
    • GainConfig.in1
  • LoConfig
    • LoConfig.out0_en
    • LoConfig.out0_freq
    • LoConfig.out0_in0_en
    • LoConfig.out0_in0_freq
    • LoConfig.out1_en
    • LoConfig.out1_freq
  • MixerConfig
    • MixerConfig.gain_ratio
    • MixerConfig.phase_offset
  • ModuleConfig
    • ModuleConfig.attenuation
    • ModuleConfig.gain
    • ModuleConfig.lo
    • ModuleConfig.marker_inverts
    • ModuleConfig.offset
    • ModuleConfig.scope_acq
  • NcoConfig
    • NcoConfig.freq
    • NcoConfig.phase_offs
    • NcoConfig.prop_delay_comp
    • NcoConfig.prop_delay_comp_en
  • OffsetConfig
    • OffsetConfig.in0
    • OffsetConfig.in0_path0
    • OffsetConfig.in0_path1
    • OffsetConfig.in1
    • OffsetConfig.out0
    • OffsetConfig.out0_path0
    • OffsetConfig.out0_path1
    • OffsetConfig.out1
    • OffsetConfig.out1_path0
    • OffsetConfig.out1_path1
    • OffsetConfig.out2
    • OffsetConfig.out3
  • QbloxConfig
    • QbloxConfig.module
    • QbloxConfig.sequencers
    • QbloxConfig.slot_idx
  • QbloxConfigHelper
    • QbloxConfigHelper.clear()
    • QbloxConfigHelper.configure()
    • QbloxConfigHelper.configure_awg()
    • QbloxConfigHelper.configure_connection()
    • QbloxConfigHelper.configure_mixer()
    • QbloxConfigHelper.configure_module()
    • QbloxConfigHelper.configure_nco()
    • QbloxConfigHelper.configure_sequencer()
  • QcmConfigHelper
  • QcmRfConfigHelper
    • QcmRfConfigHelper.configure_attenuation()
    • QcmRfConfigHelper.configure_lo()
    • QcmRfConfigHelper.configure_module()
    • QcmRfConfigHelper.configure_offset()
    • QcmRfConfigHelper.configure_sequencer()
  • QrmConfigHelper
    • QrmConfigHelper.clear()
    • QrmConfigHelper.configure()
    • QrmConfigHelper.configure_scope_acq()
  • QrmRfConfigHelper
    • QrmRfConfigHelper.configure_acq()
    • QrmRfConfigHelper.configure_attenuation()
    • QrmRfConfigHelper.configure_lo()
    • QrmRfConfigHelper.configure_module()
    • QrmRfConfigHelper.configure_offset()
    • QrmRfConfigHelper.configure_sequencer()
  • ScopeAcqConfig
    • ScopeAcqConfig.avg_mode_en_path0
    • ScopeAcqConfig.avg_mode_en_path1
    • ScopeAcqConfig.sequencer_select
    • ScopeAcqConfig.trigger_level_path0
    • ScopeAcqConfig.trigger_level_path1
    • ScopeAcqConfig.trigger_mode_path0
    • ScopeAcqConfig.trigger_mode_path1
  • SequencerConfig
    • SequencerConfig.awg
    • SequencerConfig.connection
    • SequencerConfig.demod_en_acq
    • SequencerConfig.marker_ovr_en
    • SequencerConfig.marker_ovr_value
    • SequencerConfig.mixer
    • SequencerConfig.nco
    • SequencerConfig.square_weight_acq
    • SequencerConfig.sync_en
    • SequencerConfig.thresholded_acq
    • SequencerConfig.trigger_count_thresholds
    • SequencerConfig.trigger_threshold_inverts
    • SequencerConfig.ttl_acq
  • SquareWeightAcq
    • SquareWeightAcq.integration_length
  • ThresholdedAcqConfig
    • ThresholdedAcqConfig.marker_address
    • ThresholdedAcqConfig.marker_en
    • ThresholdedAcqConfig.marker_invert
    • ThresholdedAcqConfig.rotation
    • ThresholdedAcqConfig.threshold
    • ThresholdedAcqConfig.trigger_address
    • ThresholdedAcqConfig.trigger_en
    • ThresholdedAcqConfig.trigger_invert
  • TtlAcqConfig
    • TtlAcqConfig.auto_bin_incr_en
    • TtlAcqConfig.input_select
    • TtlAcqConfig.threshold
• qat.purr.backends.qblox.constants module
  • Constants
    • Constants.GRID_TIME
    • Constants.IMMEDIATE_MAX_WAIT_TIME
    • Constants.LOOP_UNROLL_THRESHOLD
    • Constants.MAX_QCM_OFFSET_V
    • Constants.MAX_QCM_RF_OFFSET_MV
    • Constants.MAX_QRM_OFFSET_V
    • Constants.MAX_QRM_RF_OFFSET_V
    • Constants.MAX_SAMPLE_SIZE_SCOPE_ACQUISITIONS
    • Constants.MAX_SAMPLE_SIZE_WAVEFORMS
    • Constants.MIN_QCM_OFFSET_V
    • Constants.MIN_QCM_RF_OFFSET_MV
    • Constants.MIN_QRM_OFFSET_V
    • Constants.MIN_QRM_RF_OFFSET_V
    • Constants.NCO_FREQ_LIMIT_STEPS
    • Constants.NCO_FREQ_STEPS_PER_HZ
    • Constants.NCO_PHASE_STEPS_PER_DEG
    • Constants.NUMBER_OF_REGISTERS
    • Constants.NUMBER_OF_SEQUENCERS_QCM
    • Constants.NUMBER_OF_SEQUENCERS_QRM
    • Constants.REGISTER_SIZE
• qat.purr.backends.qblox.device module
  • DummyQbloxControlHardware
    • DummyQbloxControlHardware.set_data()
    • DummyQbloxControlHardware.start_playback()
  • QbloxControlHardware
    • QbloxControlHardware.allocate_resources()
    • QbloxControlHardware.connect()
    • QbloxControlHardware.disconnect()
    • QbloxControlHardware.install()
    • QbloxControlHardware.set_data()
    • QbloxControlHardware.start_playback()
  • QbloxPhysicalBaseband
  • QbloxPhysicalChannel
    • QbloxPhysicalChannel.baseband
    • QbloxPhysicalChannel.build_qubit()
    • QbloxPhysicalChannel.build_resonator()
    • QbloxPhysicalChannel.config
    • QbloxPhysicalChannel.slot_idx
  • QbloxResonator
    • QbloxResonator.get_acquire_channel()
    • QbloxResonator.get_measure_channel()
• qat.purr.backends.qblox.ir module
  • Opcode
    • Opcode.ACQUIRE
    • Opcode.ACQUIRE_TTL
    • Opcode.ACQUIRE_WEIGHED
    • Opcode.ADD
    • Opcode.ADDRESS
    • Opcode.AND
    • Opcode.JUMP
    • Opcode.JUMP_GREATER_EQUALS
    • Opcode.JUMP_LESS_THAN
    • Opcode.LOOP
    • Opcode.MOVE
    • Opcode.NEW_LINE
    • Opcode.NOP
    • Opcode.NOT
    • Opcode.OR
    • Opcode.PLAY
    • Opcode.RESET_PHASE
    • Opcode.SET_AWG_GAIN
    • Opcode.SET_AWG_OFFSET
    • Opcode.SET_MARKER
    • Opcode.SET_NCO_FREQUENCY
    • Opcode.SET_NCO_PHASE
    • Opcode.SET_NCO_PHASE_OFFSET
    • Opcode.STOP
    • Opcode.SUB
    • Opcode.UPDATE_PARAMETERS
    • Opcode.WAIT
    • Opcode.WAIT_SYNC
    • Opcode.WAIT_TRIGGER
    • Opcode.XOR
  • Q1asmInstruction
  • Sequence
    • Sequence.acquisitions
    • Sequence.program
    • Sequence.waveforms
    • Sequence.weights
  • SequenceBuilder
    • SequenceBuilder.acquire()
    • SequenceBuilder.acquire_ttl()
    • SequenceBuilder.acquire_weighed()
    • SequenceBuilder.add()
    • SequenceBuilder.add_acquisition()
    • SequenceBuilder.add_waveform()
    • SequenceBuilder.add_weight()
    • SequenceBuilder.build()
    • SequenceBuilder.jge()
    • SequenceBuilder.jlt()
    • SequenceBuilder.jmp()
    • SequenceBuilder.label()
    • SequenceBuilder.logic_and()
    • SequenceBuilder.logic_not()
    • SequenceBuilder.logic_or()
    • SequenceBuilder.logic_xor()
    • SequenceBuilder.loop()
    • SequenceBuilder.move()
    • SequenceBuilder.nop()
    • SequenceBuilder.play()
    • SequenceBuilder.reset_ph()
    • SequenceBuilder.set_awg_gain()
    • SequenceBuilder.set_awg_offs()
    • SequenceBuilder.set_freq()
    • SequenceBuilder.set_mrk()
    • SequenceBuilder.set_ph()
    • SequenceBuilder.set_ph_delta()
    • SequenceBuilder.stop()
    • SequenceBuilder.sub()
    • SequenceBuilder.upd_param()
    • SequenceBuilder.wait()
    • SequenceBuilder.wait_sync()
    • SequenceBuilder.wait_trigger()
• qat.purr.backends.qblox.live module
  • QbloxLiveEngine
    • QbloxLiveEngine.shutdown()
    • QbloxLiveEngine.startup()
  • QbloxLiveHardwareModel
    • QbloxLiveHardwareModel.create_engine()