qat.purr.backends package

Subpackages

• qat.purr.backends.calibrations package
  • Submodules
    • qat.purr.backends.calibrations.remote module
      • BuiltinRemoteCalibration
      • CustomCalibration
      • find_calibration()
      • run_calibration()
• qat.purr.backends.qblox package
  • Submodules
    • qat.purr.backends.qblox.codegen module
      • QbloxContext
      • QbloxEmitter
      • QbloxPackage
      • calculate_duration()
      • get_nco_phase_arguments()
      • get_nco_set_frequency_arguments()
    • qat.purr.backends.qblox.config module
      • AttConfig
      • AwgConfig
      • ConnectionConfig
      • GainConfig
      • LoConfig
      • MixerConfig
      • ModuleConfig
      • NcoConfig
      • OffsetConfig
      • QbloxConfig
      • QbloxConfigHelper
      • QcmConfigHelper
      • QcmRfConfigHelper
      • QrmConfigHelper
      • QrmRfConfigHelper
      • ScopeAcqConfig
      • SequencerConfig
      • SquareWeightAcq
      • ThresholdedAcqConfig
      • TtlAcqConfig
    • qat.purr.backends.qblox.constants module
      • Constants
    • qat.purr.backends.qblox.device module
      • DummyQbloxControlHardware
      • QbloxControlHardware
      • QbloxPhysicalBaseband
      • QbloxPhysicalChannel
      • QbloxResonator
    • qat.purr.backends.qblox.ir module
      • Opcode
      • Q1asmInstruction
      • Sequence
      • SequenceBuilder
    • qat.purr.backends.qblox.live module
      • QbloxLiveEngine
      • QbloxLiveHardwareModel
    • qat.purr.backends.qblox.visualisation module
      • plot_acquisitions()
      • plot_packages()

Submodules

• qat.purr.backends.echo module
  • Connectivity
    • Connectivity.Ring
  • EchoEngine
    • EchoEngine.optimize()
    • EchoEngine.run_calibrations()
  • add_direction_couplings_to_hardware()
  • apply_setup_to_hardware()
  • generate_connectivity()
  • get_default_echo_hardware()
• qat.purr.backends.live module
  • LiveDeviceEngine
    • LiveDeviceEngine.build_baseband_frequencies()
    • LiveDeviceEngine.model
    • LiveDeviceEngine.optimize()
    • LiveDeviceEngine.process_reset()
    • LiveDeviceEngine.shutdown()
    • LiveDeviceEngine.startup()
    • LiveDeviceEngine.validate()
  • LiveHardwareModel
    • LiveHardwareModel.add_device()
    • LiveHardwareModel.add_instrument()
    • LiveHardwareModel.add_physical_baseband()
    • LiveHardwareModel.add_physical_channel()
    • LiveHardwareModel.create_engine()
    • LiveHardwareModel.get_device()
    • LiveHardwareModel.get_instrument()
  • apply_setup_to_hardware()
  • build_lucy_hardware()
  • sync_baseband_frequencies_to_value()
• qat.purr.backends.live_devices module
  • ControlHardware
    • ControlHardware.add_physical_channel()
    • ControlHardware.set_data()
    • ControlHardware.start_playback()
  • ControlHardwareChannel
  • DCBiasChannel
    • DCBiasChannel.bias_value
    • DCBiasChannel.connect_to_instrument()
  • Instrument
    • Instrument.close()
    • Instrument.connect()
    • Instrument.disconnect()
    • Instrument.driver
  • LivePhysicalBaseband
    • LivePhysicalBaseband.connect_to_instrument()
    • LivePhysicalBaseband.get_output_state()
    • LivePhysicalBaseband.set_frequency()
    • LivePhysicalBaseband.turn_off()
    • LivePhysicalBaseband.turn_on()
• qat.purr.backends.qiskit_simulator module
  • QiskitBuilder
    • QiskitBuilder.ECR()
    • QiskitBuilder.R()
    • QiskitBuilder.X()
    • QiskitBuilder.Y()
    • QiskitBuilder.Z()
    • QiskitBuilder.cR()
    • QiskitBuilder.ccnot()
    • QiskitBuilder.clear()
    • QiskitBuilder.cnot()
    • QiskitBuilder.delay()
    • QiskitBuilder.had()
    • QiskitBuilder.measure()
    • QiskitBuilder.merge_builder()
    • QiskitBuilder.repeat()
    • QiskitBuilder.reset()
    • QiskitBuilder.swap()
  • QiskitEngine
    • QiskitEngine.execute()
    • QiskitEngine.optimize()
    • QiskitEngine.run_calibrations()
    • QiskitEngine.validate()
  • QiskitHardwareModel
    • QiskitHardwareModel.create_builder()
    • QiskitHardwareModel.create_engine()
    • QiskitHardwareModel.create_runtime()
  • QiskitRuntime
    • QiskitRuntime.execute()
  • get_cl2qu_index_mapping()
  • get_default_qiskit_hardware()
  • verify_placement()
• qat.purr.backends.realtime_chip_simulator module
  • ControlType
    • ControlType.MEASURE
    • ControlType.RESET
  • CouplingType
    • CouplingType.CrossKerr
    • CouplingType.Exchange
  • MeasurementStatistics
    • MeasurementStatistics.build_tree()
    • MeasurementStatistics.extract_branch_trajectory()
    • MeasurementStatistics.extract_outcome_probabilities()
    • MeasurementStatistics.get_branch_nodes()
  • OperatorInfo
    • OperatorInfo.name
    • OperatorInfo.operator
    • OperatorInfo.qubit_id
  • RTCSCoupling
    • RTCSCoupling.targets()
  • RTCSQubit
    • RTCSQubit.N
    • RTCSQubit.rotating_frame_frequency
  • RTCSResonator
  • RealtimeChipSimEngine
    • RealtimeChipSimEngine.build_simulator_resets()
    • RealtimeChipSimEngine.get_branches()
    • RealtimeChipSimEngine.get_tensor()
    • RealtimeChipSimEngine.model
    • RealtimeChipSimEngine.optimize()
    • RealtimeChipSimEngine.plot_dynamics()
    • RealtimeChipSimEngine.plot_pulses()
    • RealtimeChipSimEngine.process_reset()
  • RealtimeSimHardwareModel
    • RealtimeSimHardwareModel.add_couplings()
    • RealtimeSimHardwareModel.couplings
    • RealtimeSimHardwareModel.create_engine()
  • Section
    • Section.control_type
    • Section.drive_hamiltonian
    • Section.indices
    • Section.qubits
    • Section.simulation_time
  • add_qubit_coupling()
  • add_qubit_stack()
  • apply_setup_to_hardware()
  • create_subplots()
  • get_default_RTCS_hardware()
  • get_resonator_response_segments()
  • get_resonator_response_signal_segment()
  • get_resonator_response_splicing_indices()
  • get_simple_resonator_response()
  • random()
  • spline_time()
  • tukey_window()
• qat.purr.backends.utilities module
  • BlackmanFunction
    • BlackmanFunction.derivative()
    • BlackmanFunction.eval()
  • ComplexFunction
    • ComplexFunction.derivative()
    • ComplexFunction.dt
    • ComplexFunction.eval()
  • Cos
    • Cos.eval()
  • DragGaussianFunction
    • DragGaussianFunction.eval()
  • ExtraSoftSquareFunction
    • ExtraSoftSquareFunction.eval()
  • GaussianFunction
    • GaussianFunction.derivative()
    • GaussianFunction.eval()
  • GaussianSquareFunction
    • GaussianSquareFunction.eval()
  • GaussianZeroEdgeFunction
    • GaussianZeroEdgeFunction.eval()
  • NumericFunction
    • NumericFunction.derivative()
  • PositionData
    • PositionData.end
    • PositionData.instruction
    • PositionData.start
  • RoundedSquareFunction
    • RoundedSquareFunction.eval()
    • RoundedSquareFunction.step()
  • SechFunction
    • SechFunction.eval()
  • SetupHoldFunction
    • SetupHoldFunction.eval()
  • SimpleAcquire
    • SimpleAcquire.delay
    • SimpleAcquire.instruction
    • SimpleAcquire.mode
    • SimpleAcquire.output_variable
    • SimpleAcquire.physical_channel
    • SimpleAcquire.pulse_channel
    • SimpleAcquire.samples
    • SimpleAcquire.start
  • Sin
    • Sin.eval()
  • SoftSquareFunction
    • SoftSquareFunction.eval()
  • SofterGaussianFunction
    • SofterGaussianFunction.eval()
  • SofterSquareFunction
    • SofterSquareFunction.eval()
  • SquareFunction
    • SquareFunction.derivative()
    • SquareFunction.eval()
  • evaluate_pulse_integral()
  • evaluate_shape()
  • get_axis_map()
  • plot_buffers()
  • predict_pulse_amplitude()
  • remove_axes()
  • software_post_process_discriminate()
  • software_post_process_down_convert()
  • software_post_process_linear_map_complex_to_real()
  • software_post_process_mean()
  • validate_input_array()
• qat.purr.backends.verification module
  • Lucy
    • Lucy.Latest
  • LucyVerificationEngine
    • LucyVerificationEngine.max_circuit_duration
    • LucyVerificationEngine.verify_instructions()
  • QPUVersion
    • QPUVersion.with_version()
  • VerificationEngine
    • VerificationEngine.verify_instructions()
  • VerificationError
  • VerificationModel
    • VerificationModel.create_engine()
  • get_verification_model()
  • inject_name()
  • verify_instructions()
  • verify_program()